|
| Posted on 4/2/09 at 03:59 PM | |
|
Glen, That is correct. Only difference I use a hover press for 60 seconds then press it for 150 seconds on darks. Light you can go 30 seconds on hover then 30 seconds press. I still recommend you do your own in house testing using our guide lines as a starting point. Through the dryer I would recommend running it at half the speed you would normally run plastisal and work your way up if you need to speed it up for production, but at the speed your printer prints you will have time to run it through a couple of times if neccessary. It all depends on how long your heat element is. Best, Jesse www.idecotech.com ____________________ Jesse Martinez Netemagine Enterprises Inc. International Decorating Technologies www.filmoutputsolutions.com www.idecotech.com | ||
  
|