|
| Posted on 8/1/08 at 04:40 PM | |
|
|
Don't have any idea if your press is like most but the safety circuit were usually yellow wires marked 70. If you have two side by side in the control box try jumping those just as a test. You should not run the press with these jumped out as there is a safety issue doing this. ____________________ Rich Hoffman CEO The M&R Companies 1N372 Main St. Glen Ellyn, Illinois USA 60137 800-736-6431 +1-630-858-6101 rich.hoffman@mrprint.com mrprint.com 
| |
  
|