Subject: Re: yellow sparkle

ScreenPrinters.Net > Boards > Wilflex/PolyOne >Re: yellow sparkle

Monello Under 100 posts Status: Offline	Posted on 5/20/08 at 08:06 AM
	You have to use probably a 12 S mesh - in USA this is a ą30 mesh ... sparkle pigment is probably 0,008 so will not pass thru finer mesh

This thread:

yellow sparkle by nathanielson - on 2/13/08 at 08:41 PM

Re: yellow sparkle by Zelko-4-EVA - on 2/14/08 at 08:24 AM

Re: Re: yellow sparkle by nathanielson - on 3/27/08 at 12:54 PM

Re: yellow sparkle by RaySmith - on 2/16/08 at 09:34 AM

Re: Re: yellow sparkle by bimmridder - on 3/15/08 at 03:03 PM

Re: Re: Re: yellow sparkle by nathanielson - on 3/27/08 at 12:55 PM

Re: Re: yellow sparkle by nathanielson - on 3/27/08 at 12:57 PM

Re: yellow sparkle by Monello - on 5/20/08 at 08:06 AM

[ Home | ScreenPrinters.net | Feedback | Register | Profile | FAQ | Help ] [ Login | Lost Password ]

Only registered members may post to the Boards.

Need to register? It's free!

Having trouble posting after logging in? Click Here