|
| Posted on 10/7/09 at 01:37 PM | |
|
Hi All, About to print a 4 (spot) color job using matsui 301 inks. The first color is going to be a white underbase. Wondering if I should just use the 301 opaque white? Or try and discharge it? If so what discharge to use? Also - is it OK to flash between colors with this ink? I think that the amount of detail in this design is going to demand it. I want the print to be as soft as possible but not kill myself printing these things...Also it's a pretty large run, like 300+ shirts, any general tips for long runs using this ink? THANKS! | ||
  
|